I needed a break from a four year old who was testing his limits a little, and went down to the shop to sharpen some chisels. Now, I know that SOUNDS like a bad idea, and it probably was.
I’ve been wanting to modify the profile of these old chisels I picked up a while back to be more like the flat carving chisels I have in use already. I picked them up in the early phase of my tool acquisition period, which means I bought a bunch of stuff whenever I found it not always buying something I might need or want. These were picked up in a bundle, hoping to be paring chisels but look a bit more like carving chisels because of the way the tang enters the handle.
Regardless, I have good chisels now, and these needed to find a new life. They worked OK with a single bevel when I needed to outline a carved design or something, but I thought they could use a good sharpening and the one small flat carving chisel I have was a double bevel.
First I set the angle by eye on the tool rest on my grinder, and added the bevel roughly to what I wanted with a slow speed white wheel I use for sharpening my turning tools.
Then I pulled out the oil stones and put them through the grits free hand.
I started with the Coarse India from Norton, and worked the roughness off the grinder and adjusted the bevel slightly.
Next I used the Medium to refine the edge a little.
A few swipes on the Translucent Arkansas and I was nearly done.
Final step was a few strokes on some leather charged with “green stuff” for a final mirror polish.
I make it sound simple, but this sharpening regimen took me years to figure out, and purchase. I’m really happy with what I can do in a fairly short amount of time with these stones, and I don’t have to bother with water stones. I know most everyone else loves them to death, but I find the mess abhorrent personally. Everyone should find a system they like and stick with it, that’s what I’ve heard and that’s what I also recommend.
In the end I was able to slice paper with these edges, and the cut wood very nicely when used in a “stab cut” to set in an outline. All in all I’m happy. (And I was able to burn off the mood the willful child had caused, without cutting myself. Working in my shop relaxes me so, I need to do it more.)